Updated: 11 Dec 2022
Asetek Invicta Clutch Pedal (Forte Compatible)
The Invicta Clutch was designed and tested rigorously during development to ensure that the racer will feel a realistic bite point when shifting gears in the racing simulator. The fierce spring load gives you a realistic and slamming rebound, and a feeling of true engagement exactly like you will feel from the slave cylinder and clutch release bearing in a real racecar.
The intuitive design allows for easy adjustment of force and a mechanical change of pedal curves. Mapping out the curve to your needs gives you the engagement that ensures the best clutch performance for your needs. The Invicta Clutch will help you gain all-important milliseconds while shifting.
This product is only compatible with the Invicta Brake and Throttle and the Forte® Brake and Throttle – not as a stand-alone product. Both Invicta and Forte pedal face plates are included.
INTUITIVE ATTACHMENT TO BRAKE & THROTTLE
With the acknowledgement that not all racecars are equipped with a manual clutch, Asetek SimSports® supplies the Invicta Clutch as a separate add-on product to make sure that all racers’ preferences are considered.
The clutch slides directly on to the Invicta Pedals Brake & Throttle and Forte Pedals Brake & Throttle by tightening two screws and a small electrical connector. With this, you are ready to turn your racing simulator from automatic to manual clutch. In just a few steps, you are ready to drive.
Asetek SimSports Invicta Pedals are for Competitive Gamers and Racing Enthusiasts who want the ultimate immersive sim racing experience. The Invicta sim racing pedals feature a proper clutch bite point with a realistic rebound to give you the best and most realistic racing experience of driving on a real circuit with sim pedals.
GENERAL TECH & DIMENSIONS
Exquisite, radical, and minimalistic industrial Danish design (Registered Community Design No. 009148265-0001/0002/0003)
16-bit magnetic wireless hall CPS (Clutch Position Sensor) with no mechanical wear and zero maintenance
Die-cast aluminum zero play pedal arm with integrated long durability ball bearings and bronze bushing at the clevis rotation point
Pedal arm designed for 200 kg of force and a burst pressure of up to 700 kg!
Four mechanical pedal curve settings
Spring load adjustment
Attaches to Invicta Pedals Brake & Throttle and Forte Pedals Brake & Throttle
Both Invicta and Forte pedal face plates are included
Adjustable pedal stop
Adjustable travel settings
Made in Denmark
Sustainable manufacturing with 100% on-site re-use of waste material
Die-cast high-quality pedal base with integrated heel rest and RGB LED that can be adjusted, dimmed or turned completely off in the RaceHub™ software
The clutch can be calibrated through the RaceHub software
Clutch upper and lower deadzone, as well as bite point, can be set through the RaceHub software
All adjustable mechanical features are by default colored orange
If purchasing the Invicta™ Clutch separately, you will have to use hex keys supplied when purchasing the Invicta Pedals Brake & Throttle or the Forte Pedals Brake & Throttle, or purchase them separately at your local hardware store
Depth, width and height: 406 mm x 115 mm x 271 mm
Weight: 1,6 kg
MANUALS AND MORE
Invicta™ Clutch System – mm
Invicta™ Clutch System – inch
Invicta™ Pedals Brake, Throttle & Clutch – mm
Invicta™ Pedals Brake, Throttle & Clutch – inch
Invicta™ Manual Clutch v.1.2
Troubleshooting for Invicta™ Pedals
Invicta™ Clutch System